What to do when a slab leak is an emergency
Three signs are classic. Water pressure drops for no reason, a patch of tile or concrete floor feels warm, or you hear running water under the house when every tap is off. Water bubbling up through the floor or flooding a room is an emergency, and our line is open 24/7 for it. We book the earliest visit we can.
Until we arrive:
- Close the main water valve to stop the flow. If the house has no pressure after that, the leak is almost certainly on the house side.
- Keep rugs and furniture off a wet floor and wipe up standing water so it does not run into walls.
- Stay away from outlets and appliances in a wet room, and shut off the breaker for that area only if you can do it dry.
- Check your water meter with everything off. A moving dial confirms a leak and helps us plan.
What a slab leak is and why it matters
A slab leak is a leak in a water line that runs under or inside a concrete floor. Hot water lines, because of the heat and movement, fail more often, but cold lines leak too. A small leak wastes water and raises the bill. A larger one can soften the soil beneath the slab and lead to damp floors, mold and damaged flooring.
Not every Trussville home sits on a slab, and many have basements or crawl spaces where lines are exposed and easy to reach. If yours has a slab, treat unexplained moisture or a hot spot as a reason to call, and do not wait for the stain to spread.
Ways to fix a slab leak
Breaking the floor is not the only option. The right fix depends on the line, the location and the flooring.
| Option | How it works | Best fit |
|---|---|---|
| Spot repair through the slab | Open the floor over the leak and replace the damaged section | A single leak in an accessible spot. |
| Reroute the line | Run a new line through the attic or walls and abandon the old one | Repeat leaks or a hard-to-reach location. |
| Epoxy lining | Coat the inside of the pipe with a resin lining | Certain pipe conditions, not every leak. |
| Repipe the house | Replace failing lines throughout | Older pipe likely to leak again. |
We explain each option and its trade-offs. Rerouting avoids cutting a finished floor, and we will say so when it is the better answer.
How we find the leak under the floor
Acoustic listening gear picks up the hiss of pressurized water through concrete. Thermal imaging helps when a hot line leaks, because the warm patch shows on the surface. Pressure testing isolates one line at a time, so we know which one to open.
That work is the same as general leak detection, applied to a slab. Locating the leak within a small area means a smaller opening and a lower repair price, and it keeps your flooring damage to a minimum.
Warm spot on the floor or no pressure? Call the 24/7 line and we will help you confirm what is happening.
Call (205) 896-0120What affects the cost of slab leak repair
Ask for a clear price before work starts. These factors drive it.
Detection time
A tight, quiet house makes listening easier than one with noisy equipment nearby.
Repair method
Spot repair, a reroute and a repipe are three different scopes.
Flooring
Tile, hardwood and carpet each add different restoration costs after the opening.
Pipe condition
If other lines are failing, a larger fix may save money in the end.
Timing
Emergency calls at night are quoted as emergency work.
Insurers sometimes cover the cost of accessing and repairing a sudden slab leak and the resulting damage, though policies differ widely. Ask before the floor is opened.
Codes, permits and what to ask
Repair pipe used under or beside a slab is made to ASTM standards, and plumbing codes such as the IPC and UPC list approved materials and how they are supported and protected.
Ask the building department at 205-655-5483 whether your repair needs a permit, and ask your plumber to name the pipe material going in.
Slab leak questions from Trussville homeowners
Yes. Our line is open 24/7. If water is on the floor or the house has lost pressure, call, shut off the main and we will book the earliest visit we can.
A moving water meter with all taps off, a warm floor spot, the sound of running water and rising bills are the main signs. Water pooling or damp carpet near walls is another.
Not always. Depending on the line and the location, rerouting through the attic or walls can avoid cutting the slab. We go through the choices with you.
If your house has no basement or crawl space, it may be slab on grade. A look at the foundation or the original plans usually answers it, and we can check when we visit.
Yes. We cover Pinson, Clay, Leeds and Springville as well as Trussville.
